New wheel!

Well I have finally got round to getting a slightly bigger steering wheel. I have gone for a 14" (previously a 13") premium grade leather traditional style, with nicely polished and radiused edged spokes. The wheel is flat, rather than semi-dished and has a slightly thicker rim and was bought from Scarborough Racing Developments.

The only issue was that it was a 9 hole fixing and the previous wheel was a 6 hole fitting. The advice was to temporarily fix the wheel with 3 bolts through the holes that still lined up, then drill the remaining 6 holes through the boss. The steering wheel was then fixed with the 9 countersunk fixings screws, washers and nylocs provided, putting the central circular ring supplied in place. An easy upgrade!

New steering wheel fixed

Stoneleigh National Kit Car Show 2017

I didn't take the Cobra to the show for various reasons (none to do with the car), but I still went to Stoneleigh.

Here are some photos of the Cobras from the Cobra Club at Stoneleigh:

Mark Clayton's AK nearest the camera (only the second day out!)

The DVLA must have made a fortune from the XX60BRA brigade.
Here is Simon Smith's AK (SS 60BRA), next to Noel Hirst's black and rather battered looking car
(someone ran into the back of it on the forth day out, ouch!)

Love the red and black car

Note Keith Akerman's GD (the cream one) with the billet wood bonnet prop

On the GD stand this beauty caught my eye, it is a MK3R (that is a MK3 with the big arches).

A real show stopper in my opinion

GD even got a mention on the Chris Evans breakfast show, following the kit car show!

The next day I went to the National Motor Museum at Gaydon. Loads of cars there, mainly from the British Leyland line. A few got my attention, including FAB1, a sparkling pink number:

Thunderbirds are go!

And some others from the past:

The F Type concept that got away. First seen by me at Curborough on a photo shoot

Monte Carlo winner in the hands of Paddy Hopkirk. Those were the days!

Mark Webber's F1 Jaguar (now Red Bull F1)

The first ever Jaguar E Type undergoing restoration

... and a Le Mans winning D Type

And for those Strictly dance fans:

Morris (not linked to the car) men, with traction engines in the background

Photos of the car

Couldn't resist a few photos!

Stripes - changed my mind!

Cobra stripes

Today I had vinyl wrap stripes applied to the Cobra by Expression Car Wrapping in Baildon (see link below on the right and speak to Jamie). I have been going to have stripes, then not, then stripes, then not etc. You get my point - indecisive!

So I have finally made up my mind and gone for two broad metallic grey stripes (a sort of gunmetal) with a metallic red (more burgundy really) pin stripe on each side. The red matches the leather stitching and the carpets. The stripe measurements are taken from Superperformance website (which is approved by Shelby) and fit between the wiper spindles, the roll hoops and the reverse/fog lights (total 360 mm). The red stripe is 6 mm, then there is a gap showing the body colour (white) of 5 mm, then a grey stripe of 152 mm and then a central body colour gap of 25 mm. It is almost the same as I envisaged in June 2015 (see post)!

I took the car down in the morning and removed various things at their workshop such as the wipers, screen, number plate light, boot handle etc. I had removed the Cobra badges and sun visors in advance. The car was then left with Chris at Expression.

In the afternoon, after the stripes had been applied, I went down to fix the various parts, before driving home. It even looked good stripped down!

Here is the finished job. Very pleased.

So why have I changed my mind? Well one of my daughters said that a Cobra without stripes is .... well not a Cobra. She is the one who said that I drove it like Miss Daisy by the way! You would think that I would ignore her because of comments like that.

Anyway, if I change my mind again (which I don't think I will), I can always have the stripes removed!

Steering wheel

There is no power steering on the GD. I have fitted a 13" steering wheel and this makes it a bit heavy I think, so I might change it for a bigger diameter wheel at some stage (still leather).

Side vents

You may remember that I was not happy with the side vents from GD. I didn't like them in stainless steel, so had them powder coated in black. Still didn't like them! They didn't look suitable for such an expensive car. So I had some made that now look the part. Thanks to Mark and Josh for organising and making them.

They arrived in bare aluminium.

Side vents in bare metal

My first job was to make a paper template in order to mark out the captive studs. Once drilled I slightly elongated the holes so that they could be positioned exactly. Next I sprayed the vents with a primer, before coating with a Hammerite satin black.

Vents sprayed in stain black

Then I attached the vents to the car.

Vent fitted

And the full view

Gardner Douglas open day 2017

Fancy seeing the new GD factory and an assortment of factory and customer built cars (both Cobra and Lola T70 types)? Then Andy and Meena are holding an open day for existing and new customers at their new Grantham factory on Saturday 20th May, 2017. So if my build has inspired you, why not come along and see what you could have!

If you book you can even arrange a demo. You can chat to existing owners too, without booking!

The new factory is at Retro House, Swingbridge Road, Grantham, NG31 7XT (just off the A1), tel 01476 567180. The open day will be held between 10 am and 4.30 pm.

National Kit Car Show 2017 - Stoneleigh