Over 90,000 page views!

Just topped 90k page views, with the US taking the top spot, followed by the UK. Thanks to all visitors to my blog!

Northern Cobra Club North York Moors run

It was the Cobra Club Northern annual run this weekend, organised by Mike and Angela Hammond. We decided to just do the Sunday (the run was Saturday and Sunday). The overnight stop and meal was at the White Horse Inn at Rosedale Abbey. Our room was called the Kildale! Sense of humour?

Twelve Cobras had turned out for the run from Rosedale Abbey, ending at the Yorkshire Air Museum at Elvington, near York.

My car in the middle

Most of the Cobras

We travelled up on the Saturday evening, only to find that the battery warning light came on and the voltmeter was showing 13 volts (a little low). After some fiddling with the battery cables and Si Smith shorting out the contacts with his wedding ring (ouch - don't try this at home - the ring gets red hot), we decided that it couldn't be fixed, but was probably ok for the run. However, being cautious, we took the decision to head home. The run back was uneventful - so why did we not do the run?

On Tuesday an auto electrician checked out the car and pronounced the alternator faulty (only done 2,150 miles!). So a new one has been ordered and will be delivered and hopefully fitted tomorrow (Thursday).

Today the oil was changed again (a year since its last change), as a precautionary measure. So 5.5 litres of Mobil's best and a new filter put in/on to the engine at 2,275 miles.

Stoneleigh Kit Car Show 2018

Someone counted 85 Cobras on the UK Cobra Club area on Sunday and around 45 on Monday plus over 25 that I saw elsewhere at the show. What a display. Superb!

A view of some of the Cobras on display

Another view with my car in the foreground

Another shot .... of Cobras

My car (again) with the bonnet up

Thanks to all those who came to say hello on Sunday and Monday - I am not going to name check as I will no doubt miss someone off! It really is a privilege to talk to you all. Comments on my car and blog are really appreciated. It was great to meet all the enthusiasts, both people I know and new Cobra owners embarking upon the build process. Good luck to all and hopefully my blog maybe some small help along the way.

Heated seats part 3 - wiring

The supplied relays were fixed to the transmission tunnel behind the seats, using self tapping screws over the carpet.

Relay fixed to the transmission tunnel

The transmission tunnel carpets were lifted along the edge near the floor. The wires were then fed along this area towards the front of the car and up to the central under dash tray.

Wires routed under the carpet, against the transmission tunnel

The earth wire was attached to the ground point on the chassis.

Ground point on chassis

The supply and ground wires were both extended.

Wires extended and tie wrapped in place

20mm holes were drilled in the under dash trays near to the heater outlets. The switch wires were disconnected from the loom and fed through the tray and clicked in to place. They were then reconnected to the looms.

The supply (live) wire was connected to position 3 on the ignition switch, so that the seats only operated when the ignition was on and would not drain the battery if left switched on.

So now to test. Without the ignition switched on, there were no lights on the switches in any position - so a good start! Next the ignition was turned on. A green light when the switch was set to the low setting. A red light when it was set to maximum. And no light at the off/central point - great news.

Now I just need to test it in anger.

Edit: Been out in the car today (Thursday) and the heated seats really work. Brilliant!

First run out of 2018

Bolted in the seats after fitting the heat pads. Then started her up. Just love the sound of that V8.

To Ilkley, then Bolton Abbey, up to the Strid, over to the outskirts of Skipton, down to Addingham, into Ilkley over the Moors to home. Then topped up with Super Unleaded - the car, not me! Lovely day and great weather.

Good to get out again.

Burley-in-Wharfedale Classic Car Show - 19 August

See over 350 classic cars at the Burley Classic Show near Ilkley. Last year there were Aston Martins, Rolls Royce, Minis, Jaguars, MGs, Triumphs, Jowetts, Austins, Datsun, Land Rover, American cars and much more. Plus a good selection of motorbikes and some steam engines.

There will be a number of Cobras at the show from the Northern Cobra Club, including mine. So if you fancy seeing them and the car featured in this blog, do come along. It is a great day out.

Put it in your diary - 19 August - and say hello!

Heated seats part 2 - the heaters

The heated seats kit has arrived, along with the staples.

The kit

Unfortunately the instructions are in German! But the company who produced them were very quick with a response to an email and a link to an English version. The wiring diagram was fine and understandable, but I was concerned that there was something hidden in the wording.

First the pads were detached from the loom. The pads were fixed to the foam base and back of both seats using the double sided tape fitted to the pads.

Heat pad in place

This was easy for the base, but I needed to remove more staples from the side (bolster) leather to allow me to get my arm up the back. The latter proved a bit tricky to remove the film from the sticky tape when in place! However, once done and pressed firmly in to place it appears very successful and can't be seen from the outside. Next the leather seat covers were stapled back in place using 8mm staples.

A 16mm hole was drilled in the lower back at the centre and the wires from each pad fed through. An extra layer of tape was wound round the wires, to avoid chaffing, and these were then taped in place facing the transmission tunnel.

The wires at the base of the backrest

A 16mm hole was drilled in the lower back at the centre and the two pad wires were fed through. An extra layer of tape was wound round the wires to reduce the risk of chafing. The wires were made to face the transmission tunnel and taped over. The fixing rails were re-fitted using the original cap head bolts, before the seats were cleaned with leather conditioner. Done.

Seat looks like it did originally